Benchmarking Linear and Non-Linear Behaviour of Power Inductors for Switched Mode Power Supplies

dc.contributor.affiliationAIT Austrian Institute of Technology GmbH
dc.contributor.affiliationAIT Austrian Institute of Technology GmbH
dc.contributor.affiliationAIT Austrian Institute of Technology GmbH
dc.contributor.authorMakoschitz, Markus
dc.contributor.authorBerrotaran, Jon
dc.contributor.authorBiswas, Sumanta
dc.contributor.countryAustria
dc.contributor.countryAustria
dc.contributor.countryAustria
dc.contributor.detailedauthorMakoschitz, Markus, AIT Austrian Institute of Technology GmbH, Austria
dc.contributor.detailedauthorBerrotaran, Jon, AIT Austrian Institute of Technology GmbH, Austria
dc.contributor.detailedauthorBiswas, Sumanta, AIT Austrian Institute of Technology GmbH, Austria
dc.date.accessioned2019-07-24T12:44:51Z
dc.date.available2019-07-24T12:44:51Z
dc.date.conferencedate3-6 June 2019
dc.date.issued2019-06-03
dc.description.abstractBasic power electronic circuits (such as e.g. a Buck, Boost, Buck-Boost or half-bridge topology) for grid-connected applications are in general comprised of a voltage DC-link, two or more semiconductors and an LC input/output filter. The inductor is in general one of the more expensive and bulky parts and thus an optimized design is required in most network applications. Besides design parameters as volume, cost and frequency response, also a trade-off between low core losses, and maximum current excitation for critical operating conditions as e.g. overload capability exists. If the coil is not properly designed, the non-linear area of the inductor can be reached which results in faulty system operation of the device. Hence, a testbench conception is proposed in this paper, which allows to characterize both, linear and non-linear behaviour of power inductors for switched mode power supplies and/or network applications. Eventually, the prototypical setup and measurement results will be presented and compared to analytical results in order to verify the proper operation of the test system.
dc.description.conferencelocationMadrid, Spain
dc.description.conferencenameCIRED 2019
dc.description.openaccessYes
dc.description.peerreviewedYes
dc.description.sessionNetwork components
dc.description.sessionidSession 1
dc.identifier.isbn978-2-9602415-0-1
dc.identifier.issn2032-9644
dc.identifier.urihttps://cired-repository.org/handle/20.500.12455/598
dc.identifier.urihttp://dx.doi.org/10.34890/821
dc.language.isoen
dc.publisherAIM
dc.relation.ispartProc. of the 25th International Conference on Electricity Distribution (CIRED 2019)
dc.relation.ispartofseriesCIRED Conference Proceedings
dc.titleBenchmarking Linear and Non-Linear Behaviour of Power Inductors for Switched Mode Power Supplies
dc.title.number1837
dc.typeConference Proceedings
Files
Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
CIRED 2019 - 1837.pdf
Size:
944.44 KB
Format:
Adobe Portable Document Format